WiebeTECH Notebook DriveDock v4 - access 2.5" IDE drives via FW400/USB2

Dual FireWire Ports = Allow daisy chaining. USB 2.0 Port = Allows attachment of USB hosts. Bus Powering = Allows operation of 2.5" drives via FireWire bus power. Rigid Baseplate = Allows easy alignment and attachment of 2.5" drives. +12V DC Power In = Allows powering using an AC adapter. Disk Drive Power In = Allows powering from standard 4-pin drive power connectors as is found in most computers. +12V Power Input LED = Identifies valid power input source on +12V input jack. Disk Drive Power In LED = Identifies valid power input source on 4-pin drive power Identifies valid power input source on 4-pin drive power input socket. +5V LED = Verifies that power output is operational. On / Off Switch = Allows Power Up / Down. FireWire Host Detection LED = Identifies valid FireWire host attachment. USB Host Detection LED = Identifies USB attachment. IDE Cable Connector = Supports attachment to drives inside of computers. Aluminum case = Briefcase tough; excellent heat dissipation. Small size = Fits in a pocket.

More features for accessing bare notebook drives!
Notebook DriveDock v4 is a perfect solution for anyone who deals with bare 2.5" notebook drives. It quickly attaches drives via FireWire 400 or USB. Dual FireWire ports allow daisy-chaining for more versatility. The FireWire bridge chip is the new and improved 911+ from Oxford Semiconductor, and it's substantially faster than the older 911.

Gobs of utility
Generation 4 provides plenty of options. In addition to its bright new color, it has new power control features and multiple powering options. Notebook DriveDock supports bus powering over FireWire so you should never need to use an AC adapter. However, Notebook DriveDock also supports powering via AC Adapter or 4-pin molex in case bus power is unavailable. Because it's based on the Oxford 911+ chipset, FireWire transfer rates are really fast.

Using it is easy!
Just connect the drive to the Dock, plug in power and attach a FireWire or USB cable to a host computer. That's all it takes. For more protection to the drive, a mounting plate is attached to the dock to protect the drive's circuitry.

Generation 4 is loaded with indicators: FireWire attached, USB attached, +12V input jack active, disk drive power input jack active and +5V out operational. It makes a technician's work much easier. These simple fea- tures are immensely valuable when troubleshooting a drive. It even has an on/off switch for safe drive power up and power down.

Rugged design, built to last
Grab it and go - Generation 4 is tough as nails and built to last. The small and rugged case is built from aluminum for durability.

INCLUDED
* Notebook DriveDock v4
* Attached rigid baseplate
* FireWire 400 cable (NBDDv4)
* Information CD
* Limited Warranty Statement


SPECIFICATIONS
Interface

Two daisy-chainable FireWire 400 ports: OXFW911+
USB2: CY7C683008 (NBDDv4)
Power

External power supply: 100-240VAC +12V / +3A (not included)
Power input: +12V DC input jack; +12V / +5V standard disk drive 4-pin jack (Molex connector)
Power output: +12V / +5V
Power switch: On / Off
LED Indicators

FireWire attached
USB attached
+12V input jack active
Disk drive power input jack active
+5V power operational
+12V power operational
Access
Data Speeds

FireWire 400: up to 400 Mbps (NBDDv4)
USB2 port: up to 480 Mbps

Operating Temperature

50° - 85° Fahrenheit (10° - 30° Celsius)
Operating Humidity

5% to 95%, noncondensing
Drive Compatibility

2.5" IDE drive

Shipping Weight

3 lbs.
Dimensions

3.2" x 2.2" x 0.95" (81mm x 56mm x 24mm) exclusive of attached plates, drives and cables
Certification

FCC, CE