D-Link Wireless G Access Point/Router Open Source Access Point/Router

NETWORK STANDARDS 802.11g wireless LAN 802.11b wireless LAN 802.3/802.3u 10BASE-T/100BASE-TX Ethernet ANS/1EEE 802.3 NWay auto-negotiation DEVICE INTERFACES 802.11g wireless LAN 2 10/100BASE-TX Ethernet LAN ports OPERATING FREQUENCY 2.4 to 2.4835 GHz RADIO & MODULATION SCHEMES DQPSK, DBPSK, CCK, OFDM ANTENNA 2dBi Gain detachable omni-directional antenna with RP-SMA connector SECURITY 64/128-bit WEP encryption WPA-PSK, WPA2-PSK WPA-EAP, WPA2-EAP TKIP, AES MAC address filtering SSID broadcast disable function DEVICE MANAGEMENT Web-based management through Internet Explorer v.6 or later, Netscape Navigator v.6 or later or other Java-enabled browser POWER INPUT 5VDC 2A External power adapter DIAGNOSTIC LEDs Power Status Link/Act WEP/WPA MAC Ctrl BRIDGE/REPEATER LAN1 LAN2 DIMENSIONS 144 (W) x 109 (D) X 30 (H) mm (5.67 x 4.29 x 1.18 inches) WEIGHT: 231grams (0.51Ib)

Wireless G Access Point

The D-Link DAP-1160 is a wireless Access Point (AP) compliant with the IEEE 802.11g standard. By connecting the DAP-1160 to a broadband router, users will be able to share high-speed Internet access wirelessley and create a secure wireless network to share photos, files, music, video, printers and network storage.

Linux-Based Platform

Based on the Realtek RTL8186 chipset, the DAP-1160 can be upgraded with any bespoke firmware based on the provided Software Development Kit (SDK)*. This allows programmers to make full use of the 4MB Flash memory and 16MB SDRAM to include advanced features of their choice.

Wireless Network and Data Protection

The DAP-1160 provides 64/128-bit WEP encryption and WPA/WPA2 security to protect your network and wireless data. In addition, it also provides MAC address filtering and the ''Disable SSID Broadcast'' function to prevent outsiders' access to your home or office network.

Versatility for Use in Different Applications

The DAP-1160 can be configured to operate as

* an Access Point to act as a central hub for wireless users
* an AP Client to connect to another Access Point
* a Workgroup Bridge to join two workgroups together wirelessly
* a Workgroup Bridge with AP to act as wireless hub and a bridge at the same time
* a Repeater to extend the wireless coverage to cover all ''dead spots''

In addition two Wireless Internet Service Provider (WISP) modes are supported**, which could allow several homes to wirelessly share a single link to the Internet without the need for extra routers: WISP Client Router and WISP Repeater, respectively linking to wired only or wired/wireless computers.

Easy to Install and Use

With D-Link's Click'n Connect (DCC) Wizard, you can set up your wireless network in minutes. It configures your DAP-1160's operation mode, makes it easy to add new wireless devices onto the network and helps you create a simple wireless network for your home and office.

*available on request