|
|
- Four eSATA ports
- SATA II compliant, 1.5Gb/s and 3Gb/s auto-negotiation
- FIS-based Port Multiplier-aware to support up to 20 disk drives*
- PCI-X host bus interface for high-performance applications
- Spread Spectrum Clocking (SSC) support for compatibility with all SATA drives
- Supports Mac OS X and Windows XP RAID
- Hot-swap drive support
- Mac and Windows
|
PLEASE NOTE THIS CARD WILL ONLY WORK IN A PCI-X SLOT NOT PCI-E SLOT.
IF YOU ARE ORDERING THIS CARD FOR A G5 THEN YOU MUST HAVE ANY G5 APART FROM THE LAST RELEASE OF G5'S WHICH IS REVISION 11,2 RELEASED IN AUGUST 2005.
PLEASE CHECK THESE DETAILS IN ABOUT THIS MAC AND MORE INFO IT WILL LOOK LIKE THIS:
MACHINE ID: POWERMAC11,2
THIS CARD WILL "NOT" WORK IN ANY MAC PROS ONLY PRE AUGUST 2005 G5'S.
When it comes to data storage capabilities, which do you prefer, raw storage capacity or scorching performance? With Sonnet Technologies' Tempo SATA X4P, you get the best of both worlds! This card offers unprecedented scalability through its support of port multipliers - it can handle up to twenty drives*! Used with high-performance drive enclosures like Sonnet's Fusion 500P, port multipliers manage the data flow of up to five drives in one enclosure through a single cable. Using today's highest-capacity drives, you can connect an astounding 10 Terabytes (10,000 Gigabytes!) of storage!
Tempo SATA X4P delivers performance previously unattainable with mainstream technologies. The PCI-X interface offers huge bandwidth for data throughput, so the card never slows you down. For the utmost performance, you can create multiple RAID arrays to capture and process uncompressed high definition video, or conquer other high-bandwidth applications. For fantastic flexibility, you can work with 20 drives individually and hot-swap them out as needed. You can even work with a combination of RAID arrays and individual drives - your choices aren't limited. When your storage needs have outgrown standard solutions, get a Tempo SATA X4P - it'll give you room to grow and blazing performance for the most demanding applications.
*Support for 20 drives requires the use of drive enclosures employing port multipliers (like Sonnet's Fusion 500P). When using an enclosure without a port multiplier (such as Sonnet's Fusion 400), Tempo SATA X4P will support up to 4 drives.
|
 | Power Mac G3 (Blue & White) 4 PCI slots, 100 MHz system bus and either a 300, 350, 400 or 450 MHz G3 processor in a ZIF socket |
 | Power Mac G4 (all models) All Power Mac G4s share the same external dimensions although the styling or colouring differs between some models |
 | Power Mac G5 (PCI-X models) All Power Mac G5 models prior to the Dual-Core/PCI Express models have 3 PCI-X slots, which are backwardly compatible with standard PCI cards. |
 | eSATA The external connector for Serial ATA. |
 | PCI-X PCI-X (Peripheral Component Interconnect Extended) cards are backwards compatible with PCI slots (though it will run at the speed of the PCI bus). You can use PCI cards on a PCI-X bus but all cards will run at the speed of the slowest card.
PCI-X should not to be confused with PCI Express, a radical departure in connectivity standard, which is not backwards compatible. |
Mac - Power Macintosh G3 Blue & White
-
Power Mac G4 (all models except Cube)
-
Power Mac G5 (with PCI-X slots)
-
Xserve G5
-
Mac OS X Version 10.2 or later
| Win - PC with PCI-X or PCI slot
-
Windows XP SP2
|
|
print this page
email this page
ask a question
request callback
Copyright © 2012